Important NoteThis entire repo was AI created - including all of the data within. The intent was to A) help me with my personal electronics inventory; and B) see how I could use AI to make that process a bit easier. DO NOT TRUST!
MCP6002-I/P - Dual 1 MHz Low-Power Operational Amplifier
Details
- Location: Cabinet-3, Bin 32, Section C
- Category: Analog ICs
- Brand: Microchip Technology
- Part Number: MCP6002-I/P
- Package: 8-DIP
- Quantity: 25
- Status: Available
- Price Range: $0.50-1.00
- Datasheet: MCP6002 Datasheet
- Product URL: Microchip Product Page
Description
The MCP6002-I/P is a dual general-purpose operational amplifier designed for low-power applications. With a 1 MHz gain-bandwidth product and typical quiescent current of only 100µA, this amplifier is ideal for battery-powered and portable applications. The rail-to-rail input and output operation allows maximum signal swing with supply voltages from 2.7V to 6.0V, making it perfect for single-supply, low-voltage applications.
Specifications
Electrical Characteristics
- Supply Voltage: 2.7V to 6.0V single supply
- Input Offset Voltage: ±5mV typical
- Input Bias Current: ±1pA typical (CMOS input)
- Gain-Bandwidth Product: 1 MHz typical
- Quiescent Current: 100µA per channel typical
- Output Current: ±20mA per channel
- Slew Rate: 0.5V/µs typical
Physical Characteristics
- Package: 8-pin DIP (Dual In-line Package)
- Dimensions: 0.300” (7.62mm) width
- Pin Pitch: 0.100” (2.54mm)
- Operating Temperature: -40°C to +125°C
Key Features
- Dual independent operational amplifiers
- 1 MHz gain-bandwidth product
- Rail-to-rail input and output operation
- Single supply operation from 2.7V to 6.0V
- Low quiescent current (100µA per channel)
- CMOS input stage for high impedance
- General-purpose design
Pinout Diagram
MCP6002-I/P 8-Pin DIP
┌─────────────┐
OUT1│1 8│ VDD
IN1-│2 7│ OUT2
IN1+│3 6│ IN2-
VSS │4 5│ IN2+
└─────────────┘
Pin Descriptions
| Pin | Name | Description |
|---|---|---|
| 1 | OUT1 | Output of amplifier 1 |
| 2 | IN1- | Inverting input of amplifier 1 |
| 3 | IN1+ | Non-inverting input of amplifier 1 |
| 4 | VSS | Negative power supply (ground) |
| 5 | IN2+ | Non-inverting input of amplifier 2 |
| 6 | IN2- | Inverting input of amplifier 2 |
| 7 | OUT2 | Output of amplifier 2 |
| 8 | VDD | Positive power supply |
Applications
Common use cases for the MCP6002-I/P:
- Battery-powered sensor interfaces
- Portable instrumentation
- Low-power signal conditioning
- General-purpose amplification
- Audio preamplifiers
- Active filters
- Precision measurement circuits
- Single-supply precision amplifiers
Technical Notes
Important considerations for the MCP6002-I/P:
- Low Power: Ideal for battery-powered applications
- Rail-to-Rail: Maximizes signal swing in low-voltage applications
- Single Supply: Simplifies power supply design
- Input Protection: CMOS inputs require ESD protection
- Decoupling: Use 0.1µF ceramic capacitor close to power pins
- Bandwidth: 1 MHz bandwidth suitable for many general-purpose applications
Tags
dual-opamp, 1mhz, low-power, general-purpose, microchip-technology cabinet-3 bin-32 status-available
Notes
General-purpose dual op-amp suitable for a wide range of low-power analog applications.