Important NoteThis entire repo was AI created - including all of the data within. The intent was to A) help me with my personal electronics inventory; and B) see how I could use AI to make that process a bit easier. DO NOT TRUST!
Details
This is a consolidated inventory entry for assorted SMT (surface-mount technology) resistors in commonly used standard values. These resistors are stored in individual containers within Cabinet 6, Bin 2, organized by resistance value for easy identification and access.
Description
SMT resistors are compact, surface-mounted components ideal for modern PCB designs. These resistors come in standard package sizes (0603, 0805, or 1206) and are suitable for a wide range of applications including signal conditioning, biasing, pull-up/pull-down networks, and current limiting.
Resistor Values and Locations
| Value | Container | Quantity | Location |
|---|---|---|---|
| 47Ω | F | 20+ | Cabinet-6/Bin-2/Container-F |
| 100Ω | G | 20+ | Cabinet-6/Bin-2/Container-G |
| 470Ω | H | 20+ | Cabinet-6/Bin-2/Container-H |
| 1kΩ | I | 20+ | Cabinet-6/Bin-2/Container-I |
| 10kΩ | J | 20+ | Cabinet-6/Bin-2/Container-J |
| 10.2kΩ | K | 20+ | Cabinet-6/Bin-2/Container-K |
Specifications
- Type: Thin Film or Carbon Film SMT Resistors
- Package: SMT (0603, 0805, or 1206 typical)
- Tolerance: ±5% or ±1% (typical)
- Temperature Coefficient: ±100-200 ppm/°C (typical)
- Power Rating: 0.1W typical (varies by package size)
- Operating Temperature: -55°C to +125°C (typical)
- Frequency: DC to several GHz (frequency dependent)
Common Applications
- Signal conditioning and biasing
- Pull-up and pull-down networks
- Current limiting for LEDs
- Voltage dividers
- Impedance matching
- Sensor signal conditioning
- Audio circuits
- Power supply feedback networks
- General-purpose PCB design
Standard Resistor Values
These are E12 and E24 series standard values commonly used in electronics:
- 47Ω: Low impedance applications, current limiting
- 100Ω: General purpose, impedance matching
- 470Ω: LED current limiting, general purpose
- 1kΩ: Pull-up/pull-down networks, general purpose
- 10kΩ: High impedance applications, sensor biasing
- 10.2kΩ: Precision applications, specific circuit requirements
Installation
SMT resistors are designed for surface mounting on PCBs using standard SMT soldering techniques (reflow or wave soldering). They can also be hand-soldered for prototyping applications using a soldering iron.
Storage
Store in a cool, dry location. SMT resistors are typically supplied in tape and reel format or in bulk containers. Keep organized by value to prevent mixing.
Notes
These resistors are essential components for any electronics project. The variety of values stored ensures coverage for most common circuit applications. Additional values can be added as needed.
Tags
SMT resistor, resistor, 47 ohm, 100 ohm, 470 ohm, 1k ohm, 10k ohm, 10.2k ohm, surface mount, 0603, 0805, 1206